196 Super Bright 5mm Per Board

ClassicLEDs LLC is please to offer another in their expanding line of Camaro LEDs. This set is for the 1982 Thru 1992 Camaro.

This system contains two large LED boards only.

Each board contains 196 super bright 5mm red LEDs filling the lens with 4 times the light of an OEM bulb. Each PC board is white giving an improved appearance over an LED bulb containing less LEDs. The arrangement of LEDs expands the light and appearance.

EACH board contains:
• 116 Super Bright 5mm Red LEDs
• 64 Super Bright 5mm Yellow LEDs
• 16 Super Bright 5mm White LEDs

When the brake is applied, the normal brake light area LEDs fill the entire lens with light. In addition, the clear reverse lens fills with red LEDs almost doubling the red area.

The reverse light area contains 16 white LEDs. When the reverse light is used, four lines of four LEDs light. When the brakes are applied, this area also lights up red.

Boards installs using our 1156/7 bulb base wire harness. These install in the same manner as the OEM bulb. Boards are held in place using a clear silicon adhesive (not included).

The light housing requires minor modification to install the LED board. The lens does not. You will need to cut the two section dividers between the brake light/Turn signal and turn signal and Reverse light bulbs. This can be done using a Dremel tool or other cutting tools. Detail instructions with photos are available.